- 6 locking positions allow secure load in multiple height
- Heavy-duty flanged base safely secures load
- Ultra-lightweight under 10 pounds
SUNEX TOOLS Heavy-Duty Steel Jack Stand Set – 3 Ton Load Capacity, 6 Locking Positions, Lightweight Design
$102.08
- 6 locking positions allow secure load in multiple height
- Heavy-duty flanged base safely secures load
- Ultra-lightweight under 10 pounds
SKU: 613364130391
Categories: Automotive, Automotive Tools & Equipment, Jacks
Tags: Big Red Jacks, Bottle jack Jacks, Hydraulic Jacks, Jack kit Jacks, Jack stand set Jacks, Jacks, Manual hydraulic Jacks, Manual Jacks, Material handling jack Jacks, Metal Jacks, Pallet jack Jacks, Plastic Jacks, Steel Jacks, SUNEX TOOLS Jacks
Weight | 9.8 kg |
---|---|
Dimensions | 6.3 × 7.6 × 6.8 cm |
Brand | SUNEX TOOLS |
10 reviews for SUNEX TOOLS Heavy-Duty Steel Jack Stand Set – 3 Ton Load Capacity, 6 Locking Positions, Lightweight Design
Add a review Cancel reply
Related products
Automotive
Rated 4.67 out of 5
$24.98
Rated 3.67 out of 5
$139.00
Rated 4.29 out of 5
$44.98
Rated 3.67 out of 5
$69.98
Rated 4.00 out of 5
$29.97
Anonymous –
These jack stands have a great looking/feeling finish. The base plate has a hole in the center so you don’t have to worry about it getting filled up with dirt. The circular base helps keep it from sinking down if you are on a softer surface. To adjust them you pull the pin out and move it up or down then put the pin back in when the holes are lined up. These work great and they’ll be in my pickup toolbox for whenever I need them.
Anonymous –
I have 2 big 3/4 ton 4×4 trucks and these are perfect for them and my sports car. I like that the aluminum doesn’t mar the aluminum chassis parts. They are easy to carry and move around under the vehicle. Nice looking and great quality. Glad to have these in my shop.
The only drawback to the flat panel bottoms is that they would be unstable unless used on a very smooth concrete surface.
Anonymous –
Ordered this product and was surprised how strong these jack stands held up. Would recommend to anyone the needs a trust worthy stand in their shop!
Anonymous –
Great for working on small equipment where space is limited but height is needed, such as lawn tractors and subcompact tractors. Works well with normal passenger cars as well. The aluminum is thick and is of good quality the pins are well made and fit into the corresponding holes tightly. It is nice to have a set of jack stands that have a maximum as high as this pair without weighing as much as a pair of steel ones would. Would strongly recommend to any mobile mechanic or any one who works on subcompact and/or lawn and garden tractors.
Anonymous –
I got these jackstands as a lightweight alternative to my previous set of heavy duty 3-ton jackstands. The previous ones are extremely heavy and while they were solid it was a pain to drag them around being so heavy and large and also finding a place to store them. These aluminum jack stands are incredibly light, but after doing a full oil change and tire rotation with them are also very solid. Because the stands are somewhat short I had to use them at their max extension which initially had me worried that they would wobble or tip but even at full extension they are solid and stable. I had no worries once I had my truck up in the air on these stands. I like that they have a large flat base because sometimes I do have to work on asphalt and in the summer my other stands will sink into the surface a little bit and leave small divots where the legs were. One thing to note is that the saddle on the top of the stands is small and not very deep so these work better on designated jack stand points and may not be a good choice for trying to set under a solid axle or under suspension members because it would be easy for them to slip out. All in all nice stands that are way more convenient to work around because of their light weight and smaller size. The smaller foot print and narrow body also make it easier to maneuver a floor jack around them when space is tight.
Anonymous –
received these last week. immediately put them to work in my shop. i have to say these are the most visually appealing, lightest, coolest jack stands i have ever used. super simple to assemble. super easy to adjust. each stand only weighs 5 lbs each
Anonymous –
These stands are fantastic. I really like how compact and low profile they are, as well as being very light weight and easy to move and position. For as light weight as they are, they are tremendously sturdy and secure.
Anonymous –
These are better than expected. One they are a good looking jack stand with attention to logo and coloring. Second these things are beefy where is counts. Comparing Sunex jack stands to my other “3” ton pin style stand was a surprise. The sunex stands have a thicker and bigger diameter base. The center beam that the pin locks into is also a bigger diameter. This just adds to peace of mind for me when under a vehicle, especially when working in tight spots needing extra room for jacks, lights, or drain pans. After using these I will not buy another brand.
Anonymous –
I received two jackstands in the mail and immediately tried them out on an ongoing project car I have. I really like the design, especially the fact that I can place them close to the jack with very little interference. They hold the wieght perfectly and are very stable. I will order the matching set in the very near future. Thanks Sunex for another great product!
Anonymous –
I was looking for an additional pair of jack stands to help support the car while I was doing some suspension work. My regular stands would hold up the car but I needed more support to hold the rear components on the beam as I removed the struts from either side. I picked these up because I live in Florida and even a protected garage doesn’t prevent rusting of my tools. Bonus is that these aluminum jack stands are light weight allowing me to use them while under a vehicle (have a bad shoulder and lifting and moving is limited in certain positions). Overall weight of the pair is nearly the weight of one of my standard 3-ton steel stands. The hardware supplied is high quality with a locknut for the bolt and pins are chained to the stand body so you don’t lose them, all machining is precise and they look good to boot. I’m confident that these will stand the test of time and I know that if something goes wrong with them, Sunex will be there with their excellent customer service to assist me.